| Type: | Wheel Excavator |
|---|---|
| Usage: | Special Excavator, Mining Excavator, GM Excavator |
| Bucket: | Backhoe |
| Transmission: | Hydraulic Transmission |
| Drive Type: | Internal Combustion Drive |
| Bucket Capacity: | 1.0~1.5m³ |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | The Main Performance Parameter of Backhoe Loader UR388 | |||
| Overall Operating Weight | 8200KG | Final Reducer | Single Stage Final Reducer |
| Transport Dimension | Rated Loader of Axle | 4/18.5t | |
| L*W*H(mm) | 6150×2250×3763 | Transmission System | |
| Wheel base | 2200mm | Torque Converter | |
| Min. Ground Clearance | 300mm | Model | YJ280 |
| Bucket Capacity | 1.0m3 | Type | Single-stage Three Elements |
| Breakout Force | 38KN | Max. Efficiency | 84.4% |
| Loading Lifting Capacity | 2500KG | Inlet Pressure | 0.4Mpa-0.55 Mpa |
| Bucket Dumping Height | 2742mm | Outlet Pressure | 1.2Mpa-1.5 Mpa |
| Bucket Dumping Distance | 1062mm | Cooling Method | Oil-cooling Pressure Circulation |
| Digging Depth | 52mm | Gearbox | |
| Backhoe Capacity | 0.3 m3 | Type | Fixed Shaft Power Transmission |
| Max. Digging Depth | 4082mm | Oil Pressure of Clutch | 1373Kpa-1569 Kpa |
| Swing Angle of Excavator Grab | 190o | Gears | Two Gears Ahead, Two Gears Astern |
| Max. Pulling Force | 39KN | Max.Speed | 22Km/h |
| Engine | Tyre | ||
| Model | YC4A105Z-T20 | Model | 14-17.5/19.5L-24 |
| Type | turbocharging four-stroke | Pressure of Front wheel | 0.22 Mpa |
| Cylinder-Inside Diameter*Stroke | 4-105 | Pressure of Back Wheel | 0.22 Mpa |
| Rated Power | 75KW/100HP | Brake System | |
| Rated Speed | 2400r/min | Service Brake | Air Over Oil Caliper Brake |
| Min. Fuel Consumption | 235g/kw.h | External Type | |
| Max.Torque | 310NM | Self-regulation | |
| Displacement | 4.3L | Self-balance | |
| Steering System | Emergency Brake | Operation Power Implementing brake | |
| Model of Steering Device | BZZ5-250 | Manual Operation Power Terminating Brake | |
| Steering Angle | ±36 o | Hydraulic System | |
| Min. turning radius | 6581mm | Digging Power of Excavator Grab | 46.5KN |
| Pressure of the system | 12Mpa | Digging Power of Dipper | 31KN |
| Axle | Bucket Lifting Time | 5.4S | |
| Manufacturer | Feicheng Axle Factory | Bucket Lowering Time | 3.1S |
| Main Transmission Type | Double Reduction | Bucket Discharge Time | 2.0S |
| Note:The parameters are subject to change without notice | |||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}